Surge Protection with new demand for sophisticate electronic equipment
AC DC MOS Protectors - Orange Series


  • Type-PS 137-M Orange Series 1/1
  • Single Phase - Plug In Series
  • Load Rating: 230/120VAC & 25A (1Ph+N+Gnd)
  • Total Surge Curr.:125kA(8x20μs); 18kA(10x350μs)
  • Response Time: < 1nsec

  • Multistage Surge Protector
  • 8 (Eight) Stages Series Protector
  • High grade bi-directional cascade filtering
  • Metal enclosures
  • IEC61643-1 class I+II+II; IEC60939-2; UL1283
AC DC MOS Protector Type - PI 780 Orange Series
AC DC MOS protector - Type PS 137-M Orange Series
AC DC MOS protector - Type PS 11-M Orange Series
AC DC MOS protector - TypePS 146-M Orange Series

AC DC MOS Protector Type - PS 137-M Orange Series is compact stand alone unit that provides effective and reliable protection against surges and transients coupled with high grade EMI/RFI filtering. The unit consists of 8 (eight) & 25A protection stages. The protector have separate cascade bidirectional filtering of phase and neutral wire.

These protectors have special design to protect and improve functioning of low power devices like computers and other office equipment, up to large systems found in Broadband Wireless, Telecom, Automation Control, Medical, Instrumentation, Solar Photovoltaic, Military and similar application. more...

The AC DC MOS Protectors completely eliminates frequency noise power pollution, preventing ground loops and common mode disruption. Installing those protectors ensures the waveform delivered to your expensive equipment is as sinusoidal as possible.

They are designed for protection of electronic appliances in L.V. supply systems against impulse surge and against high-frequency (electromagnetic) disturbance.They full fill and exceed standard requirement IEC61643-1 class I+II+III; IEC60939-2; UL1283

REDUCE THE TOTAL COST

AC DC MOS Protector present Multistage Protection system with 8 (eight) protection stage in one device, and reducing surge current of 99.9% at a single point. (AC DC MOS Protector is surge protector of class I+II+III in one device according IEC61643-1; and B+C+D according VDE 0675). more...

AC DC MOS Protector Orange Series can be conveniently installed at any standard power outlet to eliminate disruptive and damaging electrical disturbances. Those protectors provides the most reliable surge protection without producing harmful side effects such as ground contamination with no divert surges to ground.

AC DC MOS Protector Type - PS 137 Orange Series

is specifically designed to protect, upgrade and improve functioning of computers, telecommunication, medical, audio, video and all sensitive electronic equipment. High current capability, up to 25A per phase, makes these surge protectors ideal equally for sensitive equipment and industrial usage.

Technical Specifications:

The basic module of type AC DC MOS Protector - Orange Series is 8 (eight) stages Single Phase Protector with applications for load currents of up to 25A.

Installation:

The surge Protector of type AC DC MOS Protector - Orange Series is compact stand alone unit and it is install quickly and easily to standard electrical Schuko outlets on princip PLUG and PLAY. The enclosures is waterproof. The option for connectors is Shouko plug or Therminal block.

Reliability:

If the stages 2,4 and 6 are out of function, the stages 1,3 and 7 are still provide a high grade cascade bi-directional filtering along with ultimate (5-th) protections stage.

Philosophy:

The AC DC MOS Protectors have coordinated approach to lightning protection, surge and transient protection as well as grounding, an approach that embraces all aspects of potential damage. No single technology can effective protect electronic devices from the damaging effects of lightning and induced transients, which can severely damage or destroy electronic systems. In order to provide the optimum level of protection, AC DC has developed integrate 8 (eight) stages Surge protector that provides effective and reliable protection against surges and transients.

Approach:

AC DC MOS Protectors provides a systematic approach on two fronts: Surge protection and Bi-directional filtration. While there are companies and products that attempt one of these, AC DC MOS Protectors is the only product that seamlessly merges the two technologies. The unique multistage design provides the most advanced power filter protector.

Technology:

AC DC MOS Protectors Type-PS Orange Series are surge protector of class I+II+III in one according to IEC 61643. The AC DC MOS Protectors reduced surge events in excess of 99.9% at a single point. They also full fill standard for electromagnetic (radio) interference suppression IEC60939-2.

Design:

The compact stand alone small dimension unit allow easy placement where surge protection and filtration are most needed.

Investment:

Installation of AC DC MOS Protector type - PS Orange Series is excellent choice for investment in the quality of your power network supply, extended equipment life and reduce their down time and errors.

Technical Specifications:

Type
AC DC MOS Protector Type - PS 137 Orange Series
Order Code
500.116
Nominal Voltage
V=230/120VAC
Clamping Volatge
V=280/170VAC
Nominal Current
I=25A
Total Surge Current
Surge Cur. 125kA (8/20µs) or 18kA (10/350µs)
Response Time
< 1nsec
Product Standard
IEC61643-1 Class I+II+III (B+C+D); IEC60939-2

Eight Protection Stages:

Protection Stage Technical Specification Function Technology
1. First stage L=0.7mH; Imax=up to 25A Bi-directional filtering (L-N) Front signal edge reduction; Nano Crystalline Core
(L-C configuration)
2. Second stage Surge Cur. 100kA (8/20µs) or 15kA (10/350µs) Suppression signal shape (L-N), 8/20μs or 10/350μs Varistor with thermal cut-off;
Control Gas Tube Discharge
3. Third stage L=4.2mH; Imax=up to 25A Bi-directional Phase-Neutral EMI/RFI filter (L-N)
Nano Crystalline Core
(L-C configuration)
4. Fourth stage Surge Cur. 25kA (8/20 μs) Suppression signal shape (L-N), 8/20μs Varistor with thermal cut-off
5. Fifth stage Ultimate protection stage. He switch-off the circuits breaker
install upstream, if the pick voltage > 520VDC appears on
the output. Circuits breaker should be < 250A gl/gG.
Long term signal suppression from 1μs to 2 sec. Control Gas Tube Discharge
6. Sixth stage Power MOSFET Limiter 500A (8/20 μs); Typical response < 1nses (nanosecond) High speed efficiency signal suppression Power MOSFET Voltage Suppressor
7. Seventh stage L=0.7mH; Imax=up to 25A Bi-directional filtering (N-L) Front signal edge reduction; Nano Crystalline Core (L-C configuration)
8. Eight stage Surge Cur. 100kA (8/20µs) or 15kA (10/350µs) Suppression signal shape (L,N-Gnd) 8/20μs or 10/350μs Varistor with thermal cut-off;
Control Gas Tube Discharge

Basic Circuit Diagram - Orange Series:

Application

Good power quality is impossible without removing AC power disturbances. AC DC MOS Protectors are focuses on tracking the waveform and filtering the pollution generated in power network supply. This pollution equals losses, unreliable performance, decrease asset life-spans, increase maintenance and downtime.

The AC DC MOS Protectors completely eliminates frequency noise power pollution, preventing ground loops and common mode disruption. Installing those protectors ensures the waveform delivered to your expensive equipment is as sinusoidal as possible.